Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 10 amps at 250V AC, 15 amps at 125V AC. Fits cutouts measuring 1.125" tall x 0.55" wide.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone. I'm Ellen here at etrailer.com, and we're going to be taking a look at the rocker switch with face plate. This is going to have a nice chrome face plate to kind of finish up the look. It would be great as a light switch or any other kind of electric switch, maybe for your slide out or another item that you want to turn on or off. It is going to be a single pole, single throw switch. That means it just turns one thing on or off.So let's take a closer look and make sure that this is going to be the right fit for your application.
So you can see that red switch with that black background against our chrome face plates. That holds it nicely in place. And again, just gives us that kind of complete, finished look to it. As far as the specs, again, single pole single throw. It is rated for 10 amps at 250 volts AC or 15 amps at 125 volts AC.
The size of our face plate from the outer edge outer edge is about one or. Excuse me, two and three quarter inches, roughly probably closer to actually two and eleven sixteenths, and then about one and five eighths inches wide. The actual switch itself, if you wanted to ever separate it, it's about one and a quarter by about five eighths of an inch.That's pretty much all there is to it for our look at the single rocker switch. I hope this has been helpful in deciding if this is the right one for you. One last measurement I do want to give you is the additions inaudible 00:01:47 mounting holes, just in case you're trying to replace an already existing switch.
Looks like the distance between them center to center is about two and an eighth of an inch. So that's pretty much it, it does not come with any mounting hardware. So that is something you will have to pick up on your own. A couple of small wood screws will probably do just fine. Thanks for watching, we'll see you out there on the road..
This switch was a great replacement for an existing light switch in our RV. The original switch was plastic and the mounting plate was brittle and breaking up from age. The replacement has a metal plate which will last a long time.
would buy again
Replaced the Porch Light switch perfectly in my 1996 Roadtrek 170.
Just what I needed to install a cutoff switch for my electric entry step.
Product looks just like picture and functions well.
Do you have a question about this RV Light Switch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Peter
4/18/2026
Its been a year since we installed this switch and it is still doing a great job. The metal plate will hold up a lot better than the original plastic plate that gets brittle with time.